User manuals and guides for Shimmer products.
General (3)
From the box to your first data: switching on, charging, pairing with a PC, a first stream or SD card recording, and what the LEDs mean.
Specifications, the platform and its accessories, the LogAndStream firmware (logging, streaming, configuration, synchronised logging and the SD data), and the hardware in detail.
Answers to the questions support is asked most often: Bluetooth, firmware, LEDs, SD cards, licences, export and signal quality.
Hardware Guides (11)
Sensor, expansion board, dock and accessory guides for Shimmer3 and Shimmer3R. Open on its own page
Accelerometers, gyroscope and magnetometer: how they work, how to use their data, calibrating them, and the sensors' ranges and rates.
Galvanic skin response: measurement ranges, electrodes, skin resistance, and the 3.5 mm jack for optical pulse sensing.
Measuring ECG with the ExG unit: leads and electrode placement, configuration, signal quality and heart rate.
Measuring EMG with the ExG unit: electrode positioning, configuration and common signal processing.
Load cells, strain gauges, force-sensitive resistors, skin temperature and other resistance measurement with the Bridge Amplifier+ unit, and calibrating them.
Prototyping boards for connecting your own analog, I2C, SPI and serial sensors.
Programming and debugging Shimmer3 firmware with a JTAG or Spy-Bi-Wire tool.
Measuring pulse with the optical finger probe or ear clip through the 3.5 mm jack, and converting PPG to heart rate.
Connecting your own analog, SPI, serial and parallel-bus sensors through the Shimmer's external connector.
For firmware developers and repair: the connector and processor pin assignments for Shimmer3 and Shimmer3R, the Shimmer3 mainboard's block diagram and power switching, the Bluetooth radio, the microSD data path, the battery charger and LED conventions.
Software (3)
The Consensys user guide, and the MATLAB and LabVIEW instrument drivers. Open on its own page
Installing and licensing Consensys, programming firmware, logging to SD, streaming over Bluetooth, calibrating sensors, and managing, processing and exporting data.
Streaming from Shimmer devices into MATLAB: installation, the driver classes, examples, synchronisation, orientation, ExG and Verisense.
The LabVIEW instrument driver library: example and integrated VIs, heart-rate converters and synchronisation.
Spec sheets (8)
Printable specification sheets for Shimmer3 and Shimmer3R products. Most are printed from the user guides whenever the documentation is updated, so their figures are the guides' own. The 200g IMU and Consensys sheets are older documents: where one differs from a guide, follow the guide. Open on its own page
Key features and specifications of the Shimmer3R IMU unit, from its user guide.
Key features and specifications of the Shimmer3 IMU unit, from its user guide.
The Shimmer3 IMU with its 200 g accelerometer board (v0.1, 2019). A large file.
Key features and specifications of the GSR+ unit, Shimmer3R and Shimmer3, from its user guide.
Key features and specifications of the ECG/EMG (ExG) unit, Shimmer3R and Shimmer3, from the ECG and EMG user guides.
Key features and specifications of the Bridge Amplifier+ unit, Shimmer3R and Shimmer3, from its user guide.
The PROTO3 Mini and PROTO3 Deluxe for Shimmer3, and the Shimmer3R PROTO3 Deluxe, from the PROTO3 Series User Guide.
ConsensysPRO and ConsensysBASIC software, with the Consensys Base (v1.1.0, 2017).
Sample data (5)
Example recordings from Shimmer3 units, to try software and analysis before your own data arrives. Open on its own page
Skin conductance and optical pulse recorded with a Shimmer3 GSR+ unit.
White papers and brochures (3)
Background reading on Shimmer products and their use in research. Open on its own page
Using the Shimmer3 EBio unit to monitor patients in COVID-19 clinical trials (2020).
A concept paper on continuous wearable monitoring for COVID-19 patients (April 2020).